motor image
英 [ˈməʊtə(r) ˈɪmɪdʒ]
美 [ˈmoʊtər ˈɪmɪdʒ]
网络 动态意象; 意美集团; 意美汽车; 意象
双语例句
- Study on Interpolation Algorithm in Solid Motor ICT Image Defect Test
固体发动机ICT图像缺陷检测中的插值方法研究 - Solid Motor ICT Tomography Image Denoising Technology
固体发动机ICT断层图像去噪技术 - Measuring technology of headlamps for motor vehicles applying image aligning method
应用影像对正法的前照灯检测技术 - Combine electro-acupuncture with modern neuro-rehabilitation theory would effectively improve motor function in patients with stroke. The results of brain SPECT-rCBF image showed that the mechanism of electro-acupuncture treatment may related to neuronal plasticity and brain function reorganization.
结论：盲针法能够有效用于针灸临床疗效的研究，针灸与现代康复理论相结合能有效改善急性期中风患者功能康复的疗效，SPECT-rCBF脑显像检查表明其作用机制可能系促进脑功能激活后的重组。 - The system for motor vehicle headlamp measuring is efficiency and it is organic system of image data acquisition, image processing, image show.
本论文提出的汽车前照灯检测系统是集图像数据采集、图像处理、图像显示于一体的自动化检测系统，可以实现汽车前照灯远近光的检测工作。 - Non-uniformity in rotational speed of the scanner motor will result in non-uniformity in the placement of laser scan pixels in laser image recording system.
在激光图象记录系统中，由于扫描器驱动电机的转速不均匀性造成激光扫描象素的位移不均匀。 - This motor may be used in image focusing, valve control, and any other fields, in which the load should be put inside the motor.
中空结构的压电电机主要用于对图像的聚焦调节、伺服阀控制或其他需要将被执行机构置于电机内部等场合。 - The whole project involves sensor technology, signal detection and processing, wireless communication, interface technology, motor timing and image processing, This paper is mainly responsible for the control mode of two-axis turntable and the design of fiber-optic blood flow sensor system.
整个课题涉及传感器技术、信号检测与处理、无线通信、接口技术、电机调速及图像处理软件编程，本文主要承担了其中的两轴眩晕实验转台的控制方式和光纤血流量传感器系统的设计。 - Comparison of neuronal activities during same motor sequence of two different tasks showed that during the image periods PM neuronal activities were more closely related to the FRS task, while during the cue periods no difference could be found.
对在动物完成FRS和MSS任务的相同运动顺序时放电活动增加的那些神经元所做的比较分析表明，它们在图形期里与FRS的关系要比MSS密切； - The dissertation introduces the structure and the measuring principle of the system, develops step motor controller and blending step motor driver based on L297/ L298 chip. The image processing technology is dealt with detailedly.
本文介绍了该测量系统的结构和工作原理；开发出了基于PC机和单片机的步进电机控制器以及基于L297/L298芯片的混合式步进电机驱动器。 - Development of automatic detection system of motor commutating segment based on image recognition technology
基于图像识别技术的电机换向片自动检测系统的研制 - The measure of Motor concentricity by computer image processing
基于计算机图像处理的电机同心度检测 - The design of system software was completed, with the function of data collection, image mosaic, motor driving, image display and so on.
完成了干涉仪的系统软件设计，在软件中集成了数据采集，图像拼接，电机驱动，干涉图像显示，三维形貌显示等功能。 - Its scanning for samples are carried out by the scanner together with step motor, thus a series of sample images can be obtained. Sample image with large size can be obtained after the sequential images being spliced.
用步进电机和扫描器配合扫描，得到序列图像，序列图像拼接后获得大范围样品图像。 - The X-ray attenuation property of solid rocket motor chamber material was described and the testing method for X-ray attenuation coefficient was given. The type, material and location of image quality indicator ( IQI) for radiographic examination of solid rocket motor chamber were proposed.
阐明固体火箭发动机燃烧室材料的X射线吸收特性，给出材料线吸收系数的切向与径向测试方法，提出固体火箭发动机燃烧室X射线探伤像质计类型、材料和放置的建议。 - A new method, D. C. motor commutation spark image monitoring method was proposed.
提出一种新的火花监测方法&换向火花图象监测法，介绍了该方法的特点。 - The changes of VIP immunoreactivity in the gastric walls and dorsal motor nucleus of vagus complex ( DVC) were observed with immunocytochemistry ABC and image analysis.
免疫细胞化学ABC法结合图像分析，观察电针足三里穴对大鼠胃壁和迷走背核复合体VIP神经免疫反应性的影响。 - The image acquisition completes hardware design of controller circuit, stepper motor drive circuit, image acquisition circuit, USB communications circuits and the development of related drive programme.
图像采集部分包括机械走纸装置的设计和控制器电路、电机驱动电路、图像采集电路、USB通讯电路的硬件设计及相关驱动程序的开发。 - The centroid coordinates and image coordinates of the center of the deviation, drive the horizontal and pitching two stepper motor, so that the sun is always at the center of the image spot position, so that the solar panels toward the sun.
得到太阳光斑质心坐标与图像中心坐标的偏差，驱动水平和俯仰两路步进电机，使太阳光斑始终在图像中心位置，从而使太阳能板对准太阳。 - Brushless DC motor is widely used in the household appliances, the computer auxiliary equipments, the acoustic image equipments, the office automatic equipments, the electric vehicles and the industry control in detail.
无刷直流电机广泛应用在家用电器、计算机外围设备、声像设备、办公设备和电动车及工业控制方面。 - The function of two-dimensional is the transverse scan of the sample driven by the stepper motor, which can be synchronous with the whole system. And the two-dimensional grayscale image is reconstructed by many groups of the one-dimensional signal envelopes.
二维的主要功能是引入步进电机对样品进行横向扫描，由采集卡驱动步进电机实现，并与系统的同步，根据采集的多组一维干涉信号的包络重建出二维灰度图像。 - Wide-format digital inkjet printer is a kind of inkjet print equipment with high electromechanical integration, which has complex system construction and much technical difficulty, involved with such science subjects as machinery, power electronics, motor drive, image processing and data communication.
宽幅数字喷墨打印机是一种典型的机电一体化喷印设备，系统结构较复杂，技术难度较大，涉及到机械，电力电子，电机拖动，图像处理，数据通讯等学科领域。 - The paper begins from the mechanical framework, illuminates the way of its hardware design, including the drive of stepper motor and the design of unit of the image data acquisition and transmission.
本文从系统的机械结构开始入手，主要阐述了系统的硬件电路的设计方案，其中主要包括步进电机的控制以及采集和传输系统的设计。 - Under the control of a single chip microcomputer the CMOS image sensor and a stepping motor work coordinative, which is used to collect the area of strips frame by frame periodically and sends the image data to the single chip microcomputer.
在单片机的控制下，CMOS图像传感器与步进电机协调工作，CMOS图像传感器采集片烟图像，将图像数据送入单片机进行处理，从而完成片烟面积计算和面积比例的统计工作。 - The experimental control and the parameters obtaining mainly use VC++ to control stepping motor moving, MATROX to image acquisition, MATLAB to image processing, AC-DMIS with the CMM to measure position information.
实验的控制及参数获取主要利用VC++控制步进电机运动，MATROX对图像进行采集，MATLAB对图像进行处理，AC-DMIS配合三坐标测量机测量位置信息。 - The paper selected the image sensor, processor, stepper motor drive, main design the imaging institutions, DSP peripheral circuit, the image acquisition circuit and the motor control circuit.
论文选择了适合的图像传感器，处理器，步进电机及其驱动器，主要对成像机构，DSP外围电路，图像采集电路和电机控制电路进行了设计。 - Hardware design including: tracking control circuit, stepping motor drive circuit, image acquisition circuit, limit the signal acquisition circuit and the serial communication circuit.
硬件设计主要包括：跟踪器控制电路、步进电机驱动电路、图像采集电路、限位信号采集电路和串口通讯电路等。 - The whole control system of Welding wire machine consists of industrial control computer, motor control module, analog/ digital signal conversion and processing module, image processing and power module.
焊线机的整个控制系统包括工业控制计算机、电动机控制模块、模拟／数字信号转换与处理模块、图像处理以及电源模块。 - DC motor driver is designed. Meanwhile, The integration research of the wireless communication module, image processing module, GPS module, ultrasonic detection module and other peripheral functional modules is carried out.
进行直流电机驱动器的设计研究，并展开无线通讯模块、图像处理模块、GPS模块、超声探测模块等外围功能模块的集成研究。 - The main research tasks were how to drive and control image acquisition system; motion control of stepping motor; design and manufacture illumination system; mothods of image processing and inspect reversed fitting of pinhead.
研究任务主要包括解决图像采集系统的驱动及控制、针头自动传输系统设计、照明系统的设计与制作，数字图像处理方法与针头反表缺陷检测等。